Brick new-build home with a teal front door

New Build Survey vs Snagging Survey: Which Do You Need?

October 22, 2026•12 min read

For most new-build buyers, a snagging survey is the more useful inspection. It checks finish, workmanship and unfinished work against what the developer should have delivered. A RICS Level 2 or Level 3 survey is designed for established homes: it reports on the condition of a building that has already aged, been altered or settled. The two are not interchangeable, and some buyers have good reasons to want both. This guide explains what each one covers, where they overlap, what the rules say about timing, and how to decide.

Altura Surveyors

Get a Clearer View of Your New Build

Altura Surveyors provides residential property surveys and clear, jargon-free reports to help you make an informed decision about your home.

Book a survey

TL;DR

  • A snagging survey looks for defects and unfinished work in a new home. A Level 2 or 3 survey assesses the condition of an existing building.

  • RICS says standard home surveys are not designed for snagging or new-build warranty compliance, so a snagging survey is usually the right first choice.

  • Aim to inspect before you legally complete. Fixing items is easier before you move in.

  • Some cosmetic damage must be reported within seven days of completion under the Buildmark warranty booklet, so do not leave it.

  • A Level 2 or Level 3 survey can still make sense on a conversion, a heavily altered home or a new build with unusual construction.

Table of Contents

What a snagging survey is

Snagging is the process of spotting minor issues in a new-build home and putting them right. The NHQB homeowner guide to snagging points out that your home was built outdoors, in all types of weather, by a large number of different tradespeople. Even with good supervision, some imperfections are likely.

A snagging survey is an inspection by a surveyor who looks for those imperfections in an organised way. Typical items include:

  • paint and plaster finishes, and badly fitted skirting or architraves

  • doors and windows that stick, do not close properly or are not sealed well

  • tiling, sealant and joinery workmanship

  • damaged glass, worktops, sanitary ware or flooring

  • fittings that are missing or not what was specified

  • visible problems with plumbing, heating, ventilation or electrical fittings that you can see or test with normal use

The output is a written list you can send to the developer. That list is the point: it turns “something feels off” into itemised, dated items the builder has to answer.

It is worth being honest about the limits. Like our other surveys, a snagging inspection is a visual, non-invasive inspection. A surveyor does not open up walls, floors or ceilings. If something suggests a hidden problem, the report can recommend further investigation by a specialist.

What a Level 2 or Level 3 survey is

RICS home surveys come in levels. A Level 2 Home Survey reports on the condition of a conventional property in reasonable repair. A Level 3 Building Survey goes into more depth and suits older, larger, altered or unusual buildings. Our guide to Level 2 vs Level 3 sets out the difference in full.

Both are built around a property that has a history: wear, movement, past repairs, maintenance needs. They tell you what condition the building is in and what may need attention over time. They are not written to check a brand-new home against the builder’s specification, and RICS makes the same point in its home survey standard guidance.

New build survey vs snagging: the differences at a glance

Snagging survey

Level 2 or Level 3 survey

Built for

Newly built homes

Existing, established homes

Main question

Is the work finished and to a proper standard?

What condition is the building in, and what will it need?

Focus

Workmanship, finishes, unfinished items, visible defects

Visible defects, risks, repairs, maintenance, construction

Output

List of items for the developer to put right

Condition report with ratings and advice

Best timing

Before legal completion, or within the builder’s defect period

Before exchange of contracts

Typical new-build use

Almost every purchase

Conversions, altered or unusual homes

The short version: snagging asks “has this been built and finished properly?” A condition survey asks “what state is this building in, and what might go wrong?”

Do you need a survey on a new build at all?

No law requires one. Your mortgage lender will arrange its own valuation, which is a separate exercise and not a check on build quality. It is not a substitute for an inspection of the home itself.

There are practical reasons to inspect anyway. The NHQB guide notes the scale of the issue: a study of nearly 1,700 UK new houses is the research behind its background, and the NHQB reports that the number of snags found in individual homes ranged from one to 389, with larger properties tending to have more. That is a wide spread, and it means you cannot assume yours is at the low end.

The Consumer Code also describes snagging as a common cause of frustration for new-build buyers. A trained eye does not guarantee a flawless home, but it does mean a more complete list and a clearer record.

Do you need a survey on a new build at all? — overview diagram

When a snagging survey is usually enough

If you are buying a standard, recently completed house or flat from a developer, with a warranty in place, a snagging survey is normally the more relevant choice. You are not buying age-related wear, so the main risk is workmanship and incomplete finishing.

When you may want a Level 2 or Level 3 survey too

  • Conversions and renovations. The warranty booklet itself has a requirement that existing buildings in a conversion are surveyed to determine their condition and the work needed. Part of the building is old, so a condition survey is relevant.

  • Unusual construction or heavy alteration. If the design or materials are not conventional, a Level 3 survey gives a more detailed technical view.

  • A “new build” that is not new. Some homes marketed as new-build are older properties re-fitted or extended. Ask what is actually new.

  • Resale of a recent build. A house that is a few years old, outside the developer’s two-year period, is closer to an ordinary resale purchase.

If you are not sure which case applies, the quickest route is to talk it through with a surveyor before you commit to anything.

Timing: before or after completion?

The best moment is before you legally complete. The NHQB’s resources describe a pre-completion inspection (PCI) opportunity that developers signed up to the New Homes Quality Code are expected to provide. It lets you bring a qualified inspector to the site before legal completion. Fixing things at this stage is easier and less disruptive than arranging repairs once you live there, especially where access is needed behind finished surfaces.

Two practical points:

  1. Check your contract and reservation paperwork. Ask your solicitor or conveyancer (the legal professional handling the purchase) how the pre-completion inspection is set out, and what happens if items are found.

  2. Book early. Inspectors need a finished or near-finished home. If the developer tells you completion is close, request the inspection date straight away.

Pre-completion is not your only chance. A snagging survey after you move in is still useful, because the builder is responsible for putting right defects during the first two years of the typical 10-year warranty. NHBC’s Buildmark policy booklet sets this out for that product, and other warranty providers have their own terms, so read yours.

The seven-day window for cosmetic damage

There is a short deadline that catches many buyers. Under the Buildmark booklet, cosmetic damage such as scratched glass or damaged sanitary fittings should be reported within seven days of completion. After that, it is hard to show who caused the damage, and you may end up paying for the repair.

Fine scratch on a new-build window

So even if you plan a full snagging inspection later, photograph the property on completion day and send anything obvious to the developer in writing straight away. Check your own warranty documents for the exact wording, because it depends on the provider.

Shrinkage cracks: snag or normal settling?

Not every mark in a new home is a defect. The NHQB guide explains that shrinkage is a natural part of a new home’s life: timber and plaster dry out, and fine cracks can appear. The research summary notes that developers generally do not treat cracks narrower than a £1 coin as a snag, and that keeping the home well ventilated is a recommended step while it dries.

If you want to understand what is cosmetic and what is not, this guide to cracks in plaster helps you tell expected shrinkage cracks from those worth reporting. Treat it as general background, not a diagnosis of your own walls. A wide, growing or stepped crack, or one near a door or window frame, is worth putting in front of a surveyor rather than guessing.

How to deal with the developer once you have a list

A good report only helps if you use it well.

  1. Send the list in writing. Email it to the developer’s customer care contact, with photographs, and ask for a date for the work.

  2. Keep a dated log. Record every call, visit and reply. The research behind this article stresses that a detailed, dated record with photographic evidence is often decisive if a dispute reaches the warranty provider or the New Homes Ombudsman.

  3. Know the targets. The Buildmark booklet and the New Homes Quality Code describe emergency snags being dealt with in hours and non-emergency ones aimed at 30 days where possible.

  4. Escalate in order. Start with the builder’s complaints process. If it is unresolved, the warranty provider’s resolution service and then the New Homes Ombudsman are the usual routes, as the Greater London Authority explains. Not every developer is registered, so check yours.

  5. Re-inspect. After the work is done, check each item is closed. A follow-up visit is often sensible for plumbing, heating and electrical fixes.

We do not give legal advice on your contract or warranty rights. If a dispute becomes serious, speak to your solicitor.

Which should you choose? A quick decision guide

  • Brand-new house or flat from a developer, with a warranty: snagging survey, ideally before completion.

  • New conversion of an old building: snagging survey plus a Level 3 Building Survey, because the existing structure matters.

  • Unusual or heavily altered “new” home: talk to a surveyor about Level 3.

  • Three-to-ten-year-old house that has left the builder’s defect period: treat it like a resale and consider Level 2 or Level 3, based on age and construction.

  • One specific worry, such as a roof, damp or movement: a Specific Defect Survey or a drone roof inspection can look at that issue alone.

What we offer

We are independent RICS-regulated building surveyors covering Hampshire, Berkshire and Surrey, including Farnham, Winchester and Wokingham. We only survey. We have no estate agency ties and nothing to sell you beyond the report, so you get an independent view of the home you are about to buy.

Our New Build Snagging Survey is designed for exactly the situation above. If your purchase involves an older or converted building, we also carry out a RICS Level 2 Home Survey, priced from £480 to £635, and a RICS Level 3 Building Survey. Reports are written in plain English and delivered within 5 working days, and we remain available for questions afterwards. Our guide to what a snagging survey involves goes into more detail.

To talk through your purchase, book or request a quote on our contact page. Quotes and consultations are free.

FAQ

Should I get a snagging survey on a new build?

For most new-build purchases, yes, it is a sensible step. It gives you an organised list of defects and unfinished work to put to the developer, rather than relying on your own walk-round. It is not a legal requirement, so the decision is yours.

Is a Level 2 or Level 3 survey the same as snagging?

No. RICS home surveys assess the condition of established properties, and RICS notes that they are not designed for snagging or new-build warranty compliance. A snagging survey checks finish and unfinished work in a new home.

Is it better to inspect before or after completion?

Before, where you can. The New Homes Quality Code expects registered developers to allow a pre-completion inspection, and items are easier to fix before you move in. If you complete first, you can still inspect within the builder’s two-year defect period, but report any cosmetic damage within the warranty’s short window.

How many snags should I expect?

It varies widely. The research the NHQB cites found anything from one snag to 389 across nearly 1,700 new homes, with larger properties tending to have more. A surveyor cannot tell you in advance what yours will contain.

Sources

Altura Surveyors

Questions About Your New Build?

Contact Altura Surveyors to discuss residential property surveys and get clear, professional guidance tailored to your property needs.

AAltura Surveyors

Email us[email protected]

+44 1252 929125

+44 7412 316284

Recommended

This article is general information only and is not a substitute for a survey or professional advice on a specific property. For advice on your property, contact Altura Surveyors.

blog author avatar

Altura Surveyors

Independent RICS-regulated building surveyors specialising in older, altered and higher-value homes across Hampshire, Berkshire and Surrey.

Back to Blog