
Crack Monitoring Surveys: What They Measure and When
A crack monitoring survey measures whether a crack is still moving, how fast, and in which direction. A single visit can tell a surveyor what a crack looks like. Only repeated measurement over time shows whether it is active or has settled. If you have found a new or widening crack in a home or commercial building, monitoring is often the sensible first step before you commit to repairs, a purchase or a lease decision.
This guide explains how monitoring works, how readings are interpreted, what a good report contains and where monitoring stops being enough. It is written for homeowners, buyers of older properties, landlords and business owners across Hampshire, Berkshire and Surrey.
Altura Surveyors
alturasurveyors.co.uk
Understand What Your Cracks Mean
Altura Surveyors provides property surveys with clear reports that identify significant defects and potential risks, with repair recommendations.
TL;DR
Crack monitoring means measuring a crack at set intervals to see whether it is active (moving) or stable, rather than guessing from one inspection.
Cracks are usually monitored with tell-tale gauges, fixed reference points or digital measurement, with readings logged and photographed.
Monitoring shows how a building is moving and how quickly. On its own it rarely explains why, so it sits alongside a visual inspection and, where needed, further investigation.
Cracks wider than 5mm should be reported so that a thorough structural survey can be carried out.
A useful report states the method, the data, whether movement is active or stable, and whether the recommendation is no action, further monitoring or specific repairs.
Table of Contents
What a crack monitoring survey is
Monitoring changes in crack width over time helps diagnose the cause of cracking and decide whether it is significant. That is the whole idea. Cracks appear in almost every building at some point, and most are harmless. The difficulty is telling a settled, historic crack from one that is still opening, and a photograph taken on one afternoon cannot do that.
A crack monitoring survey therefore has two parts:
An initial inspection. The surveyor looks at the crack pattern, the type of construction, the age of the building and the surroundings, and records where each crack is, its width and its direction.
A series of measurements. Reference points or gauges are fixed across the cracks and read at set intervals, so any change can be seen against the starting position.
It is a measured observation process, not a run of occasional photographs. The photographs matter as a record, but the numbers are what let a surveyor say whether the building is still moving.
One point to be clear about. Our surveys, including any initial inspection for monitoring, are visual and non-invasive. We look at what can be seen and reached without opening up the structure, and we say so in the report. We do not lift floors, open walls or dig trial pits as part of a standard survey. If the cause of a crack needs that kind of investigation, we will say so and recommend the right specialist.
When a crack should be monitored
Not every crack needs monitoring. Fine hairline cracking in plaster after a new house has dried out, for example, is common and usually cosmetic. Monitoring earns its place when the situation is uncertain:
The crack is new, or you do not know how long it has been there.
It looks wider than it did a few months ago.
It runs diagonally from a window or door corner, or stepped through brickwork, or tapers (wider at one end).
Doors and windows have started to stick.
You are buying, selling or taking on a lease and need to know whether the movement is ongoing.
Building work next door, a nearby tree, a leaking drain or an extension may have changed the ground or loading.
Where an engineer and the building owner decide that immediate action is not needed, a movement-monitoring programme can help identify the appropriate type, timing and extent of repairs. In plain terms: monitoring stops you paying for repairs too early, and stops you ignoring a defect that is getting worse.
If you are buying, you will often meet cracking in a Level 2 or Level 3 survey first. A surveyor who sees significant cracking will usually flag it and recommend further investigation. If you want to understand how those reports are structured, our guide to reading your RICS building survey report explains the condition ratings and how to act on them.
How cracks are measured and recorded
There are several methods, from very simple to instrumented. Published guidance describes cracks being monitored with tape and pencil, glass and epoxy, or a purpose-made crack monitor, with measurements recorded at weekly intervals and kept with photographs. In practice the choice depends on how precise the answer needs to be.
Method | How it works | Suited to |
|---|---|---|
Pencil marks and tape | Marks made either side of the crack and measured | A rough first check by the owner, not a formal record |
Glass or plaster tell-tales | A strip fixed across the crack that breaks if it moves | Showing that movement has happened, not how much |
Tell-tale crack gauge | Two overlapping plates, one with a grid and one with a crosshair, fixed either side of the crack | Recording movement in two directions over time |
Fixed studs or discs with a digital gauge | Small discs fixed either side, measured with a precise instrument | Finer readings where small movements matter |
Level readings | Readings along a course of brickwork or floor | Showing vertical movement and where it is concentrated |
Whichever method is used, good practice is the same:
Fix the gauge or reference points securely, across the crack and not over a loose patch of render.
Label each location with a reference and date, and draw it on a plan or elevation.
Take a photograph at installation and at every reading, from the same position.
Record the reading, the date, the weather and anything that has changed on site.
A homeowner can fit a simple gauge and keep a log. That is useful, but a surveyor adds the part that matters: choosing the right crack locations, reading the pattern across the whole building and interpreting the numbers in context.
How long monitoring should continue
There is no single period that suits every building. The length depends on the type of cracking, what is thought to be causing it and how quickly it is changing. A few principles apply:
Readings need to span enough time to show a trend. A single reading shows nothing, and two readings a week apart may only show normal daily variation.
Seasons matter. Some movement follows the weather. Clay soils, which are widespread in parts of Berkshire, Surrey and Hampshire, can shrink in dry summers and swell in wet winters, and trees can add to this. Where seasonal movement is suspected, monitoring over a full year may be needed to see the cycle.
Frequency can change. A surveyor may start with closer readings and space them out once a pattern is clear, or tighten them if a crack suddenly moves.
We agree the interval and the likely duration with you at the start, and we adjust them if the readings call for it. If a crack opens quickly between readings, do not wait for the next scheduled visit: tell your surveyor straight away.
Reading the results: stable, seasonal or progressive
The readings usually fall into one of three patterns.

Stable. The width stays the same within the accuracy of the gauge. This suggests an old crack from movement that has stopped, or minor settlement. The usual recommendation is cosmetic repair, perhaps with a short further check afterwards.
Seasonal. The crack opens and closes through the year, often wider in late summer or autumn and narrower in winter and spring. This points to ground or moisture-related movement and may call for further investigation of soil, vegetation and drainage before any repair, because filling a crack that keeps opening and closing will simply fail again.
Progressive. The crack keeps widening in one direction. This is the pattern that needs prompt action and a structural engineer’s input.
Surveyors also grade cracks by width. The BRE Digest 251 system, which gives surveyors advice on acceptable cracking and when building repairs are necessary, is the usual reference. Under that approach, categories 1 and 2, cracks of less than 5mm, were essentially aesthetic and unlikely to indicate a significant structural issue. Categories 3 and 4, between 5mm and 25mm, cause serviceability problems, and category 5, above 25mm, was considered to need structural intervention.
Guidance for local authority housing is blunt about the threshold: any crack greater than 5mm must be reported so that a thorough structural survey can be undertaken. Treat that as a sensible trigger for any building. Width alone is not the full picture, though. A narrow crack that is actively growing can matter more than a wider crack that has been static for decades, which is exactly why monitoring exists.
What monitoring cannot tell you
Monitoring is a measuring tool, not a diagnosis. Monitoring in isolation from other investigation will rarely provide enough information to fully diagnose the cause. What it does show is how the building is deforming and the rate of movement.
Finding the cause usually draws on:
the visual inspection of the building, its age and construction;
the history of the property, including previous repairs, extensions and alterations;
drainage, trees and ground conditions around the building;
in some cases, trial pits, drain surveys or soil testing carried out by the right specialist.
That is why a surveyor should explain the limits of what has been inspected. RICS standards expect surveyors to explain inspection limitations, the risk of defects evolving and appropriate further investigations. We give no definitive structural advice in a monitoring report. Where the pattern suggests structural movement, we recommend a structural engineer and tell you why.
What a crack monitoring report should include
People search for a crack monitoring report because they need something they can hand to a lender, an insurer, a seller or a landlord. A report is only useful if it can be followed by someone who was not on site. RICS guidance on reporting sets out the expected content: the inspection methodology, a summary of all monitoring data, an analysis of the crack’s significance, and clear conclusions on whether movement is active or stable. It should also give expert recommendations on whether no action, further monitoring or specific remedial works are required.
In practice, look for:
A description of the property and the scope of the inspection, including what could not be seen.
A plan or elevations showing where each gauge or reference point sits.
A table of readings with dates, plus photographs from each visit.
A plain-English reading of the data: moving, seasonal or stable.
A clear recommendation, with the reasons for it.
Any suggested specialist input, such as a structural engineer or drainage survey.
We write reports in plain English, so you can understand the conclusion without translating surveying terms.
Monitoring in residential properties
Cracks are a common worry in older, extended and period homes. Timber-framed, lime-mortared and solid-wall buildings in towns such as Farnham, Winchester and Wokingham are designed to move a little, and shallow or historic foundations respond to the ground in ways modern houses may not. A hairline crack in an old wall is not automatically a problem, but an unexplained one deserves a measured look.
Which survey fits depends on your position:
Buying an older or altered home. A RICS Level 3 Building Survey gives the most detailed inspection and is the usual choice for period, listed or heavily altered property. Our page on what a Level 3 building survey is explains what it covers. If you are unsure which level fits, see Level 2 vs Level 3.
Already own the home and have a crack you are concerned about. A Specific Defect Survey focuses on the one issue, and can include a monitoring programme.
Selling. A Pre-Sale (Vendor) Survey lets you understand a known crack before a buyer’s surveyor raises it, so you can deal with it on your own terms.
Roof or chimney cracking you cannot reach. A Drone Roof Inspection can look at hard-to-reach areas without scaffolding, though it remains a visual inspection.
If a survey you already hold has raised cracking, our guide on what to do after a bad building survey sets out the options.
Monitoring and party wall matters
Cracks and party wall work are closely linked. Building work next door, such as an extension, loft conversion or basement excavation, can change loads and ground conditions on your side of the wall. Two situations come up often:
Before work starts. A schedule of condition records existing cracks and defects in the adjoining property, with photographs and measurements. Where a crack is already there, that record stops later arguments about whether the building work caused it.
During or after work. If new cracks appear, monitoring over the following months helps show whether they are moving and, with the earlier record, supports a discussion about cause.
Under the Party Wall etc. Act 1996 the process of notices, awards and agreed surveyors is handled by the surveyors appointed. Our Party Wall Surveying service covers notices, awards and disputes. We do not give legal advice, and where a question is legal rather than technical, we recommend a solicitor.
Monitoring in commercial buildings
For commercial property the stakes are often contractual. Owners, tenants and managing agents need evidence that stands up to scrutiny, so the record has to be consistent.
Typical situations include:
Acquisition or lease. A Commercial Building Survey identifies defects, including cracking, before you commit, and monitoring can be recommended where the cause is unclear.
Dilapidations. At the end of a lease, existing cracking and who is responsible for it can be disputed. Dated monitoring data gives both sides something factual to work from. We keep to the technical record and do not advise on tenancy law.
Planned preventative maintenance. In a PPM programme, cracks are one of the items tracked over time so that repairs can be planned and budgeted instead of arriving as emergencies. RICS guidance on PPM expects that surveyors have relevant training and experience and seek suitably qualified expertise where appropriate.
Building works. During construction or refurbishment, monitoring existing cracks in adjoining structures helps the contract administrator show that the works are not causing movement, or spot early if they are.
Insurance. A reinstatement cost assessment sets the rebuild figure for cover. It is separate from monitoring, but if a building has known movement, the insurer will want to know about it, so the two records should agree.
PPM, reinstatement cost, dilapidations and contract administration are all available through our main services page.
Working with Altura on a crack
We are independent RICS-regulated building surveyors covering Hampshire, Berkshire and Surrey. We only survey: no estate agency ties, no repair business to sell you, and no valuations. That keeps the advice about the building and nothing else.
For a crack you are worried about, the sensible route is usually:
Describe the crack, its location and when you first noticed it.
Choose the survey that fits: a Level 3 survey if you are buying an older home, or a Specific Defect Survey if you own the property.
We inspect, set up monitoring where it is warranted and agree the reading schedule.
We report in plain English, normally within 5 working days of an inspection, and advise on the next step.
Quotes and consultations are free, and payment is made when you book a specific survey. If your crack is in a home you are about to buy, mention your exchange timetable when you ask for a quote so the inspection can be planned around it.

To discuss your property, you can request a Level 3 or specific defect survey quote from our team.
FAQ
How long does a crack need to be monitored?
It depends on the cause and how quickly the crack is changing. Some cracks show a clear trend within a few months, while seasonal movement can need a full year to show its cycle. Your surveyor will set the interval and expected duration at the outset and adjust it as readings come in.
Can I monitor a crack myself?
Yes, a simple tell-tale gauge and a dated log with photographs is a reasonable first step. Be aware that fixing gauges in the wrong places or misreading the numbers can give false comfort. If the crack is wider than 5mm, is growing, or is in a building you are buying, ask a surveyor to assess it.
Does a crack monitoring survey tell me what caused the crack?
Not on its own. It shows whether the crack is moving and how fast, but diagnosing the cause usually needs the visual inspection, the building’s history and sometimes further investigation by an engineer or drainage specialist. Our reports say clearly where that is needed.
Which survey should I choose if I am buying a home with cracks?
For older, altered or period homes, a Level 3 Building Survey is usually the better fit because it gives a more detailed inspection of the structure. If the surveyor finds significant cracking, they will recommend further investigation, which may include monitoring.
What should I do if a crack suddenly gets wider?
Photograph and measure it, note the date, and contact a surveyor or structural engineer promptly. Sudden widening, or cracks accompanied by sloping floors or jammed doors, should not wait for the next scheduled reading.
Book your survey with Altura Surveyors and get a clear, plain-English answer on what your crack means.
Sources
Altura Surveyors
Discuss Cracks in Your Property
Contact Altura Surveyors to discuss your property survey needs and get clear, jargon-free guidance on significant defects and potential risks.
AAltura Surveyors
Recommended
This article is general information only and is not a substitute for a survey or professional advice on a specific property. For advice on your property, contact Altura Surveyors.