Chimney stack and lead roof flashing

Chimney Condition Survey: What It Covers and Who Does It

October 19, 2026•14 min read

A chimney condition survey is an assessment of the chimney as a whole: the stack and pots you can see from outside, the brickwork and pointing, the flashing and flaunching at roof level, and, where it is needed, the flue inside. No single visit covers all of that. The outside of the stack is a job for a building surveyor. The inside of the flue is a job for a camera inspection by a sweep or flue specialist. Knowing which one you need saves money and avoids false reassurance.

We are Altura Surveyors, independent RICS-regulated building surveyors working across Hampshire, Berkshire and Surrey. We survey buildings. We do not sweep flues, install stoves or sell repairs, so this guide is explicit about where our work stops and a flue specialist’s begins.

Altura Surveyors

alturasurveyors.co.uk

Understand Your Chimney’s Condition

Altura’s RICS-compliant property surveys assess visible chimney defects and risks, with clear reports and repair recommendations.

Book a property survey

TL;DR

  • A chimney has two parts to check: the external fabric (stack, pointing, flaunching, flashings, pots) and the internal flue (liner, obstructions, leaks). Different professionals check each.

  • A standard RICS home survey is a visual, non-invasive inspection. It looks at chimneys from the outside and does not test the inside of a flue.

  • If you plan to light a fire or fit a stove in an old chimney, ask for a camera or borescope inspection of the flue as well.

  • Removing a chimney breast or stack is a structural alteration. Get engineering advice first, and if you share a wall with a neighbour, the Party Wall etc. Act 1996 may apply.

  • Treat smoke in the room, odd smells or poor burning as a reason to stop using the appliance and call a HETAS-registered professional.

Table of Contents

What a chimney condition survey actually looks at

Think of a chimney in three zones. Each one fails in its own way.

The stack above the roof

The stack takes the worst of the weather. Frost, rain and salt-laden moisture work on the masonry, and the mortar joints usually fail before the bricks do. Surveyors look for:

  • leaning, bowing or open joints in the stack;

  • eroded or missing pointing, and spalled brick faces;

  • cracked or loose flaunching (the mortar bed that holds the pots and sheds water);

  • chimney pots that are loose, cracked or capped incorrectly;

  • redundant stacks left open to the rain.

Historic England notes that salt deposition, frost action and water ingress are common problems at the roofline, where the stack meets the roof covering. Failing pointing or flaunching there can draw moisture into the structure, and dampness inside the house can appear before anything looks wrong outside.

The junction with the roof

Lead flashings, soakers and the surrounding tiles or slates are part of the chimney’s weatherproofing. A lifted or cracked flashing is a common route for water into the roof void. A drone inspection can show these details at close range without scaffolding. Our drone roof inspection service is used for exactly this kind of hard-to-reach detail.

The chimney breast and the flue inside

Inside the house, a surveyor looks at the chimney breast for damp staining, salt deposits, cracking, or signs that it has been altered. The flue itself is usually hidden. A visual survey cannot see a cracked liner, a blockage, or a leaking joint. That needs a camera.

What a RICS survey will and will not tell you about a chimney

This is the point most buyers miss. RICS home surveys are visual and non-invasive. The RICS Level 2 standard says the surveyor inspects roofs, chimneys and other external surfaces from ground level and, where needed, from neighbouring public property or with binoculars. The surveyor does not climb onto the roof or lift fittings out of the way.

A Level 3 survey is more thorough, and is the usual choice for older, altered or complex properties. But RICS guidance is clear that it is still a visual, non-invasive inspection of accessible areas. It cannot test the integrity of hidden flues or liners. The RICS consumer guide makes the same point: the internal condition of chimneys and flues is not covered.

In practice, a good survey report will:

  • describe the visible condition of each stack, pots, pointing and flashings;

  • flag leaning, cracking or water entry that points to a defect;

  • note signs of alteration, such as a chimney breast removed downstairs;

  • recommend a specialist flue inspection or repair quote where something needs a closer look.

It will not certify that a flue is safe to use. Only a camera or smoke test by a competent person can start to answer that, and the report should say so plainly.

Which Altura survey fits

Your situation

Sensible starting point

Buying a conventional house built in the last century, in reasonable order

RICS Level 2 Home Survey

Buying a period, listed, extended or altered home, or one with several stacks

RICS Level 3 Building Survey

Staining on a chimney breast, or a suspected leak at the stack

Specific Defect Survey

Stack is hard to see from the ground

Drone roof inspection, alongside the main survey

Selling and want to know what a buyer’s surveyor will find

Pre-Sale (Vendor) Survey

Our Level 2 Home Survey is priced at £480 to £635. Level 3 pricing depends on the property, so we quote after hearing about it. Quotes and consultations are free.

If you are unsure which level suits your home, our guide to Level 2 versus Level 3 surveys sets out the differences.

When you also need a flue inspection

A camera inspection looks inside the flue. It is a separate job, done by a sweep or flue specialist, and it is worth arranging in these situations:

  1. You want to bring an old chimney back into use. Historic England advises that the condition of an old chimney, including any withes, should be checked thoroughly before it returns to use, and that a borescope or CCTV should be considered where a visual check is not possible.

  2. You are fitting a stove or liner. The same guidance warns that inserting a modern liner and the heating and cooling cycles of daily use can crack old brickwork or damage internal withes, creating risks that were not obvious beforehand.

  3. You have had a chimney fire, or you do not know the history of the flue.

  4. You have just bought a house with a working fireplace and the survey recommended further checks.

A local authority leaflet on solid fuel stoves states that an existing chimney must be visually inspected to check it is in good order, clear of obstructions such as dislodged masonry or bird’s nests, and of a suitable size and type for the appliance. Building control at your own council will tell you what applies locally.

Sweeping is not surveying

Sweeping keeps a working flue clear. HETAS recommends sweeping at least twice a year when burning wood and at least once a year with smokeless fuels, and notes that blockages are a major contributor to chimney fires and carbon monoxide poisoning. A sweep will often spot a problem while working. It is still not a structural assessment of the stack.

Warning signs to act on

HETAS advises that smoke entering the room, lingering smells when the appliance is not in use, or poor burning performance are reasons to stop using the appliance and book a HETAS-registered sweep or installer. It also stresses that a carbon monoxide alarm is a backstop, not a substitute for maintenance.

The alarm itself matters. Council guidance summarising the rules says that in England a BS EN 50291 carbon monoxide alarm is required in a room with a fixed combustion appliance, and that since October 2022 this extends to existing homes. If you are unsure whether your alarms meet the rules, check with a registered installer.

Older and listed homes: diagnose before you repair

Farnham, Winchester and Wokingham all have plenty of Georgian, Victorian and earlier houses with tall brick stacks, often with several pots and a history of alterations. These are the homes where a general-purpose repair is most likely to do harm.

Historic England’s principles are straightforward: repairs should be preceded by a survey of the structure and an investigation of the materials and the causes of decay. Treating the symptom, such as a patch of damp, without finding the cause usually means the problem returns. A common example is repointing soft historic brick with hard cement mortar, which can trap moisture and accelerate decay of the brickwork rather than protect it.

Hard cement mortar between weathered historic bricks

That is why we recommend a Level 3 survey for older and altered properties. It gives you a reasoned account of the construction, the likely causes of defects and the repair options. If the property is listed, ask a conservation-experienced contractor to price any work, and check with the local authority before altering a listed building.

If you are repairing wall finishes disturbed by chimney damp or cracking once the cause is dealt with, this guide to repairing cracked interior walls explains how that cracking is approached. The order matters: fix the cause, then the finish.

Removing a chimney breast or stack: structural work

Many period homes have had a chimney breast taken out of a ground-floor room to gain space. This is a common cause of problems we look for in a survey. Taking out the breast without proper support can leave the upper stack and the chimney breast above unsupported.

Council building control guidance is clear that this is not a DIY job and needs structural calculations. It also says that a gallows bracket, a common form of support, is subject to specific limits and must be justified. The government’s own guidance lists building work that must be notified to a Building Control Body, and a local authority guide to stack removal says you must make a building regulation application before removing a stack.

If a previous owner has removed a breast, ask for the Building Regulations completion certificate. If there is none, a surveyor will note it, and a structural engineer should assess what is there. We do not give structural design advice; we flag the concern and recommend the right specialist.

Shared chimneys and party wall matters

In terraced and semi-detached houses the chimney breast often sits in the wall you share with your neighbour, and the stacks are frequently shared too. That brings the Party Wall etc. Act 1996 into play for work such as cutting into the wall, removing a breast, rebuilding a shared stack or inserting steel into a party wall.

In general terms, the Act asks you to serve notice on adjoining owners before certain works. If a neighbour does not consent, surveyors can agree a party wall award that records the condition of the neighbouring property beforehand and sets out how the work will proceed. Whether the Act applies to your project depends on the work and the walls involved, so take advice early rather than after the builder has started.

This is the same situation we see with loft conversions and basements, where chimney stacks and breasts are often disturbed. Our party wall surveying service covers notices, awards and condition records. We cannot give legal advice, so for disputes about legal rights speak to a solicitor.

Shared chimneys and party wall matters — overview diagram

Chimneys in commercial and managed buildings

Chimneys and flues are not only a domestic concern. Older shops, pubs, offices converted from houses, schools and churches around the region often have stacks and flues that are disused, shared or poorly documented. Boiler flues and extraction ducts add to the picture.

For owners, landlords and managing agents the practical questions are different:

  • Condition and risk. A commercial building survey records the visible condition of stacks, roofs and rainwater goods and highlights defects that need action.

  • Planned maintenance. Stacks and roof junctions should be inspected on a cycle. A planned preventative maintenance (PPM) survey sets out repairs and timescales so costs can be budgeted rather than arriving as emergencies.

  • End of lease. Where a building is handed back, a dilapidations report records condition against the lease obligations and the cost of putting right any disrepair, including roof and chimney items.

  • Insurance. A reinstatement cost assessment estimates what it would cost to rebuild a building, including features such as chimneys on older premises.

  • Works on site. If you are repairing or altering a stack, contract administration can keep the works to specification and programme.

The PPM, reinstatement cost, dilapidations and contract administration services are all described on our main site. As with residential work, our surveys are visual and non-invasive, and where a flue or appliance needs testing we will recommend the right specialist.

Questions to ask before you book anything

Whoever you hire, ask these:

  1. What exactly will be inspected, and what will be excluded?

  2. Will you go inside the flue with a camera, or only look from outside?

  3. Is the person independent of any company that would carry out repairs?

  4. How will findings be reported, and will it be in plain English?

  5. Will you recommend further investigation where something cannot be seen?

Independence matters. A contractor who surveys and quotes on the same job has a reason to find work. We only survey, with no estate agency or repair work behind us, so the report is written to inform you rather than to sell anything.

Book a survey that covers the chimney properly

If you are buying, selling or maintaining a property in Hampshire, Berkshire or Surrey and the chimney is a concern, tell us what you can see. We will recommend the right level of survey and say honestly where a flue inspection by a specialist would be the next step. Our reports are written in plain English and delivered within 5 working days. For homes with several stacks, a Level 3 Building Survey is usually the better fit, and our guide to what a Level 3 survey includes shows what to expect.

FAQ

Does a house survey check the inside of the chimney?

No. RICS home surveys are visual and non-invasive, and the inside of a flue is hidden from view. The surveyor looks at the stack and breast and reports what is visible. If a flue needs checking, a sweep or flue specialist should do a camera inspection.

How is a chimney survey different from a chimney sweep?

A sweep cleans the flue and may notice obvious obstructions. A survey assesses condition: the stack, pointing, flaunching, flashings and, with a camera, the liner. If you use a fire or stove regularly you will probably need both.

Do I need a survey before fitting a wood burner?

It is sensible, especially with an old chimney. Historic England advises checking the condition of an old chimney thoroughly before returning it to use, using a borescope or CCTV where needed. A HETAS-registered installer can advise on the flue and liner for your appliance.

Can I remove a chimney breast myself?

No. It is structural work that needs Building Regulations approval and engineering design to support the stack above. If the wall is shared, party wall procedures may also apply. Speak to a structural engineer and your local building control team first.

Can Altura Surveyors inspect my chimney?

We inspect chimney stacks, pots, flashings and breasts as part of our Level 2 and Level 3 surveys, specific defect surveys and drone roof inspections. We do not test flues internally, and we will say so in the report where a specialist inspection is advisable. To book, use our contact page.

Sources

Altura Surveyors

Discuss Your Chimney Survey

Contact Altura to discuss a property survey and the visible chimney defects, risks and repair recommendations it can cover.

AAltura Surveyors

Email Altura[email protected]

+44 1252 929125

+44 7412 316284

Recommended

This article is general information only and is not a substitute for a survey or professional advice on a specific property. For advice on your property, contact Altura Surveyors.

blog author avatar

Altura Surveyors

Independent RICS-regulated building surveyors specialising in older, altered and higher-value homes across Hampshire, Berkshire and Surrey.

Back to Blog